MenThe edit
Big and Tall Work Hoodies: Carhartt 3XL, 4XL and Tall Sizes
Which work hoodies come in big and tall sizes, from Carhartt's 4XL and 3XL Tall to hi-vis, and what to look for in weight, cuffs, seams and pockets.
We earn from qualifying purchases through links on this page.

Carhartt, the best-known work hoodie brand, stops at 4XL and 3XL Tall. It lists its Marquette (K121) midweight and Paxton heavyweight hoodies in regular sizes to 4XL and tall sizes from L to 3XL Tall. A good work hoodie adds a loose cut for layering, triple-stitched seams, rib-knit cuffs and a sturdy pocket.
For pullovers and zip-ups beyond workwear, see the big and tall hub.
Big and tall work hoodie sizes
Work hoodie sizes from Carhartt run in two scales. The regular scale adds width up to 4XL, and the tall scale adds body and sleeve length from L to 3XL Tall. These ranges come from Carhartt’s own product pages:
| Hoodie | Weight | Regular sizes | Tall sizes |
|---|---|---|---|
| Marquette (K121), midweight | 10.5 oz in most colors | XS to 4XL | L to 3XL Tall |
| Paxton (100615), heavyweight | 13 oz | S to 4XL | L to 3XL Tall |
| HV Class 3 Sweatshirt (104987) | Not listed | S to 4XL | L to 3XL Tall |
Fiber blends change by color. Most Marquette colors are 50% cotton and 50% polyester, but Carhartt lists Carbon Heather at 55/45 and Heather Gray at 70/30. The Paxton comes in 75/25 or 55/45 cotton and polyester, depending on the color.
If your chest is past 60 inches, a 4XL will be tight. Westport’s chart puts its 4XB at a 58 to 60 inch chest, so compare the chart on any 4XL listing with your own measurement. The 5XL and up page covers the specialists that go further.
Big and tall work hoodies, 2XL to 4XL and tall
Live listings, shown by eBay
Opens eBay in a new tab. Check condition, seller feedback and returns.
Midweight or heavyweight for work?
The midweight or heavyweight choice comes down to how much you wear over it. Carhartt calls its 10.5-ounce Marquette a hoodie for everyday wear. It calls the 13-ounce Paxton heavyweight, warmer than lighter sweatshirts, and made for layering under jackets.
A midweight hoodie suits a shop, a truck cab or spring and fall mornings. A heavyweight one suits outdoor work in the cold, under a shell or canvas coat. The Paxton also adds Rain Defender, a durable water repellent finish that Carhartt says keeps you dry in light rain. It is still a sweatshirt, not a rain jacket. The fabric guide explains cotton, polyester and fleece in more detail.
What makes a hoodie good for work
A good work hoodie earns its name in the seams, cuffs and pockets. These are the details to look for in a listing, with Carhartt’s descriptions as the example:
- Seams. Triple-stitched main seams on both the Marquette and the Paxton. Look for the stitching count in the listing, since it shows the seams are built for wear.
- Cuffs and waist. Rib-knit on both. Carhartt says the Marquette’s rib knit helps keep weather out, and a firm cuff stays put when you push your sleeves up.
- Hood. A three-piece hood with a drawcord, jersey-lined on the Paxton.
- Pockets. A front handwarmer pocket on both, plus a hidden security pocket inside the Paxton’s handwarmer pocket for a phone or keys.
- Cut. Both are loose fit, so there is room for a thermal or flannel underneath.
If you work around moving machinery, check your site rules on drawcords and loose hoods too.
Heavyweight hoodies in 3XL and up
Live listings, shown by eBay
Opens eBay in a new tab. Check condition, seller feedback and returns.
Hi-vis work hoodies in big and tall sizes
Hi-vis hoodies for road and site work are made to a safety standard. ANSI/ISEA 107-2020 is the American National Standard for High-Visibility Safety Apparel, published by the International Safety Equipment Association. ISEA notes that it is written into federal highway rules and into other worker protection standards. Carhartt’s HV Class 3 Sweatshirt says it meets ANSI/ISEA 107, Class 3, Type R, and lists it in Brite Lime and Brite Orange from S to 4XL and L to 3XL Tall.
Your employer picks the class
OSHA’s general rule on protective equipment says the employer must assess the workplace for hazards, select the equipment that protects each worker and make sure it fits. Ask which class your job needs before you buy a hi-vis hoodie, and ask whether the company supplies it.
If a hi-vis hoodie does not come in your size, a hi-vis vest worn over your own hoodie may be the practical answer, as long as your employer accepts it.
Sizing a work hoodie with room to layer
A work hoodie is sized for the layers you wear under and over it. Measure your chest over a shirt, with the tape under your arms, as Westport’s chart describes. Then measure your sleeve from the middle of your back, across the shoulder and bent elbow, to the wrist. If the sleeve falls short in a regular size, a tall size adds length at the same chest; the tall hoodies page lists who makes them.
Carhartt’s own advice on the Paxton is to order your normal size for a roomy fit that is easy to layer, or size down for a closer fit. Try any jacket you wear over the top before you take the tags off, since two loose layers can crowd the shoulders.
Work hoodie colors and care
Work hoodie colors are partly practical. Darker shades such as black, navy and brown show less grease and dirt between washes, while heather grays show more. Hi-vis colors such as Brite Lime and Brite Orange are a safety choice rather than a style one, so keep them clean enough to stay bright. Whatever the color, read the care label before the first wash: a cotton-rich blend like the 70/30 Heather Gray Marquette is more likely to shrink in a hot dryer than a 50/50 blend, so a cool wash and a low dry keep the size you bought.
Tall hoodies, LT to 5XT
Live listings, shown by eBay
Opens eBay in a new tab. Check condition, seller feedback and returns.
Frequently asked questions
Does Carhartt make hoodies in 4XL?
Yes. Carhartt lists its Marquette (K121) midweight hoodie and its Paxton heavyweight hoodie in regular sizes up to 4XL, and both in tall sizes from L to 3XL Tall.
Do Carhartt hoodies run big?
Carhartt cuts these hoodies with a loose fit. On the Paxton page it says to order your normal size for a roomy fit that layers easily, or size down for a closer fit.
Is a hi-vis hoodie enough for road work?
That depends on the job. Under OSHA rules your employer assesses the hazards and selects the protective equipment, so ask which ANSI/ISEA 107 class your site requires before you buy.
What is the difference between midweight and heavyweight work hoodies?
Fabric weight. Carhartt's Marquette is a 10.5-ounce midweight blend, and its Paxton is a 13-ounce heavyweight. The heavier one is warmer and thicker under a jacket.
Sources
- Men's Marquette Loose Fit Midweight Hoodie (K121)Carhartt
- Paxton Sweatshirt (100615)Carhartt
- HV Class 3 Sweatshirt (104987)Carhartt
- ANSI/ISEA 107-2020International Safety Equipment Association
- 1910.132, Personal Protective Equipment: General requirementsOccupational Safety and Health Administration
- Size & Fit ChartWestport Big & Tall
Part of Big and Tall Hoodies: Where to Find 2XL to 6XL That Fit


